manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec26 ceramic 3.3v os30 01/06 ec26 series ? rohs compliant (pb-free) ceramic smd package 3.3v supply voltage lvhcmos/ttl output stability to 20ppm standby function available in tube or tape and reel oscillator ec26 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. frequency range operating temperature range storage temperature range supply voltage (v dd ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise / fall time duty cycle load drive capability tri-state input voltage standby current start up time rms phase jitter -10c to 70c -40c to 85c -40c to 85c -55c to 125c 3.3v dc 10% 10ma maximum 18ma maximum 20ma maximum 40ma maximum 60ma maximum 100ppm maximum 50ppm maximum 25ppm maximum 20ppm maximum 90% of v dd minimum 10% of v dd maximum 5 nseconds maximum 7 nseconds maximum 5 nseconds maximum 3 nseconds maximum 50 10(%) (standard) 50 10(%) (standard) 50 5(%) (optional) 50 5(%) (optional) 10ttl or 30pf hcmos load max. 10ttl or 15pf hcmos load max. 15pf hcmos load maximum enables output enables output disables output: high impedance 10a maximum 10 mseconds maximum 1pseconds maximum 1.544mhz to 125.000mhz and 125.009mhz, 125.009375mhz, 125.010mhz, 127mhz, 128mhz, 130mhz, 132mhz, 133mhz, 133.333mhz, 137.472mhz, 142.850mhz, 150mhz, 155.520mhz and 156.250mhz frequency tolerance/stability options of 100ppm, 50ppm, 25ppm, 20ppm available frequency tolerance/stability options of 100ppm, 50ppm, 25ppm available frequency tolerance/stability option of 20ppm available from 1.544mhz to 106.250mhz 1.544mhz to 32.000mhz 32.000001mhz to 50.000mhz 50.000001mhz to 70.000mhz 70.000001mhz to 125.000mhz 125.009mhz to 156.250mhz inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/hcmos or ttl load , i oh = -8ma w/hcmos or ttl load, i ol = +8ma 10% to 90% of waveform w/15pf hcmos load or 0.4v dc to 2.4v dc w/10lsttl load < 35.000mhz 10% to 90% of waveform w/30pf hcmos load or 0.4v dc to 2.4v dc w/10ttl load < 35.000mhz 10% to 90% of waveform w/hcmos load or 0.4v dc to 2.4v dc w/ttl load 35.001mhz to 125.000mhz 10% to 90% of waveform w/hcmos load > 125.009mhz at 50% of waveform w/hcmos load or 1.4v dc w/ttl load < 70.000mhz at 50% of waveform w/hcmos load > 70.000mhz at 50% of waveform w/hcmos load or w/ttl load < 125.000mhz at 50% of waveform w/hcmos load, at 25c, at 3.3vdc > 125.000mhz <35.000mhz 35.000001mhz to 70.000mhz >70.000001mhz no connection v ih : 70% of v dd v il : 30% of v dd disabled output: high impedance 12khz to 20mhz offset frequency h 1.6 l 7.0 w 5.0
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec26 ceramic 3.3v os30 01/06 ec26 00 et t ts - 40.000m tr frequency tolerance / stability 00=100ppm maximum (standard) 45=50ppm maximum, 25=25ppm maximum 20=20ppm maximum operating temperature range blank=-10c to 70c (standard) et=-40c to 85c packaging options blank=bulk, tr=tape and reel (standard) frequency output control function ts=tri-state duty cycle blank=50 10(%) (standard), t=50 5(%) part numbering guide *compliant to eia 481a mechanical dimensions all dimensions in millimeters tape and reel dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tolerances = 0.1 line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: xx y zz week of year last digit of year ecliptek manufacturing identifier 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. pin 1: tri-state pin 2: case ground pin 3: output pin 4: supply voltage m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel a b c d e f 16+.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215
|